Vascumedical is a healthcare technology management partner for the equipment that keeps the highest-acuity patients alive: intra-aortic balloon pumps, Servo ventilators, CPB centrifugal pumps, and heater coolers. Trusted by UCSD Health for IABP service across their system. Veteran-owned, OEM-certified, 15+ years of field experience. Aligned to TJC EC.02.04.01.
Vascumedical extends your HTM department's capacity with corrective repair, preventive maintenance, and AEM-program-aligned documentation on the equipment that supports your highest-acuity patients. Every job is delivered to support The Joint Commission EC.02.04.01 and EC.02.04.03 medical equipment management standards.
Fault diagnosis, parts sourcing, repair, electrical safety verification (NFPA 99 / IEC 62353), and performance verification, closed with a documented service record.
Scheduled PM aligned to OEM specs or your facility's CMS-compliant Alternate Equipment Maintenance (AEM) program. Risk-based intervals supported.
Every visit closes with a structured service record (parts, tests, calibration values, leakage current, performance verification) formatted for ingestion into Nuvolo, Connectiv, EQ2, and other CMMS platforms.
Electrical safety testing per NFPA 99 and IEC 62353. Performance verification against manufacturer specs. Documentation sized for TJC and CMS audit.
Rental fleet of intra-aortic balloon pumps for short-term clinical coverage when your unit is down or in PM. No interruption to cath-lab or ICU coverage.
Phone and remote troubleshooting between visits. You speak with the field service engineer who'll work your case, not a call center.
Our depth is in cardiac, perfusion, and respiratory equipment, the systems hospitals cannot afford to have down. We also service the broader biomedical fleet your facility runs alongside.
OEM-certified service on the Maquet / Datascope IABP family.
Service for cardiopulmonary bypass centrifugal pumps used in OR and ECMO.
Calibration, PM, and repair on heater cooler systems supporting bypass procedures.
The entire Servo family: ICU, transport, and the Compressor mini.
Bedside monitoring repair, calibration, and PM across major monitor platforms.
AED battery and pad lifecycle, defibrillator service, autoclaves, and additional biomedical equipment on request.
Most third-party biomed shops claim every brand and master none. We focus on the OEM platforms that dominate the cardiac, perfusion, and respiratory floors we serve.
Vascumedical maintains a rental fleet of intra-aortic balloon pumps. When a unit is in repair or PM, we can ship a backup so cardiac coverage is never interrupted. Available short-term and on standby.
Inquire about a rentalSole field service provider for all intra-aortic balloon pumps across the UCSD Health system, one of the largest academic medical systems in the U.S.
Vetted on-site service provider on the PartsSource marketplace. Hospitals can issue work orders to us directly through their existing PartsSource procurement workflow, no new vendor onboarding required.
Field service engineers with direct OEM training across the IABP, Servo, CPB centrifugal pump, and heater cooler platforms we service.
Service workflows and documentation aligned to The Joint Commission medical equipment management standards. Audit-ready reporting on every visit.
CMS-compliant Alternate Equipment Maintenance program documentation. Risk-based PM intervals supported with the data your HTM team needs to defend them.
Electrical safety and leakage current testing performed and documented to current healthcare facility standards on every applicable service event.
Eligible for VA, federal, and IDN supplier-diversity contracts. Discipline you can hear in the first phone call.
Service records structured for ingestion into Nuvolo, Connectiv, EQ2, Maintenance Connection, and other CMMS platforms used by HTM departments.
FSEs credentialed for hospital site access through standard credentialing platforms. HIPAA-trained, BAA-ready for facilities that require it.
Field service engineers deployed across the continental U.S. with rapid travel coverage and depot repair shipping. 24/7 dispatch.
Speak with the field service engineer who'll work your case, not a triage rep. We log device, OEM model, serial, and urgency tier on the first call.
Same-day acknowledgment with parts plan, scope, and ETA. We coordinate site access through your credentialing platform and IT team where required. If your unit is down, we discuss rental coverage so the floor is never exposed.
Repair, calibrate, electrical-safety-verify (NFPA 99 / IEC 62353), performance-verify, clean, and detail. You receive a CMMS-ready service record and the unit returns clinical-ready.
VascuMedical's prompt service and expertise ensured our equipment is always safe and reliable. Highly recommended.
Vascumedical specializes in critical care equipment: intra-aortic balloon pumps (IABP), Servo ventilators, cardiopulmonary bypass (CPB) centrifugal pumps, heater coolers, contrast injectors, autoclaves, vital signs monitors, defibrillators, and AEDs. Our deepest expertise is in cardiac and perfusion equipment.
Yes. Vascumedical is a vetted on-site service provider on the PartsSource marketplace. Hospitals using PartsSource can issue work orders to Vascumedical directly through the On-Site Service tab in their PartsSource portal, with no separate vendor onboarding required.
Maquet, Datascope (IABP family including CS-100, CS-300, Cardiosave, Cardiosave Hybrid, Autocat 2), Getinge (Servo ventilator family), Cardioquip (MCH-100 heater coolers), Arrow, and additional OEM platforms across cardiac, perfusion, and respiratory equipment. Our field service engineers carry direct OEM training credentials.
Yes. Vascumedical maintains a rental fleet of intra-aortic balloon pumps (Maquet/Datascope CS-300, Cardiosave, Cardiosave Hybrid). Units ship same-day, configured and tested for clinical use, so cath lab and ICU coverage is uninterrupted while a primary unit is in repair or PM.
On-site within 24 to 72 hours nationwide, with one-hour dispatch confirmation 24/7. For balloon pump emergencies, a rental unit can ship same-day from our fleet. We do not route through a call center; you speak directly with the field service engineer who will work your case.
Yes. Vascumedical service records are structured for ingestion into Nuvolo, Connectiv, EQ2, Maintenance Connection, and other CMMS platforms used by HTM departments. Each report includes parts, tests, calibration values, leakage current readings, and performance verification, sized for ingestion or audit.
Yes. Vascumedical service workflows align with The Joint Commission EC.02.04.01 and EC.02.04.03 medical equipment management standards. We provide AEM-program-aligned documentation that supports CMS-compliant risk-based PM intervals, with the data your HTM team needs to defend deviation from OEM intervals on survey day.
Yes. Vascumedical LLC is a U.S. Army veteran-owned small business, registered with SAM.gov (UEI DRRDRZYHNK75, CAGE 9Q6R4). Eligible for VA hospital, federal, and IDN supplier-diversity contracts. NAICS codes include 811219, 339112, and 423450.
Electrical safety testing per NFPA 99 (Healthcare Facilities Code) and IEC 62353 (Medical Electrical Equipment), plus performance verification against manufacturer specifications. Documentation is produced for every applicable service event and is sized for The Joint Commission and CMS audit.
Three paths. (1) PartsSource customers: issue a work order through your PartsSource portal under On-Site Service, no onboarding required. (2) IDN/health system procurement: request our capability statement, COI, W-9, and standard MSA at info@vascumedical.net. (3) Smaller facilities and CAHs: per-event service with no annual contract or minimum volume.
Field service nationwide across the continental United States. 24/7 dispatch, one-hour confirmation, on-site response within 24 to 72 hours depending on location. Depot repair and rental shipping are available for facilities outside drive distance of our field service engineers.
If equipment is down or you need a balloon pump rental, call directly. If you are evaluating vendors or building an RFP, the form routes to our team and we respond within one business hour.
